Preventative + Diesel Service 10k,20k
Preventative + Diesel Service 10k,20k
Couldn't load pickup availability
Package included:
-Super diesel Additive
-Pro-Engine Oil System Cleaner
Pro Engine Oil System Cleaner
Description
Designed for quick and safe removal of deposits in engine oil circuit prior an oil change. Optimizes oil consumption, guarantees proper oil pressure in hydraulically activated systems and ensures proper oil flow after a cold start. Allows the fresh oil to immediately develop full performance while restoring full engine performance and reducing exhaust emissions.
Areas of application
For cleaning and flushing out the oil circuits in gasoline and diesel engines. Use at each oil change. Can be safely used in vehicles with toothed belt running in oil. Not suitable for use in motorcycles with wet clutches!
- 300 ml Can
- Part No. 22206
- Suitable for all commercially available
APPLICATION - 300 ml ARE ENOUGH FOR UP TO 6 LITERS OF OIL
STEP 01: Shake the product and apply directly to the oil reservoir.
STEP 02: Add to the motor oil at operating temperature before the oil change.
STEP 03: Allow the engine to idle for approx. 10 minutes.
STEP 04: Change the oil and the filter.
Our information is based on thorough research and may be considered reliable, although not legally binding.
Super Diesel Additive
Description
A combination of agents which cleans, disperses, protects materials and boosts the cetane number. The lubricity enhancer contained provides sufficient lubricity for diesel fuels low in sulfur. Due to the increased ignition performance, the fuel shows better combustion behavior when the engine is cold and unpleasant odors in the exhaust gases are reduced.
Areas of application
Added to diesel fuel tank for all diesel engines, particularly in modern high pressure diesel engines in passenger cars, trucks, tractors, construction machinery and stationary engines.
- 300 ml Can
- Part No. 2002
- Can be mixed with fuel at any time.
APPLICATION - 300 Ml IS SUFFICIENT FOR UP TO 20 GALLONS OF FUEL
STEPS: aPPLY DIRECT TO THE FUEL TANK. iT CAN BE ADDED REGARDLESS OF THE NUMBER OF LITERS IN THE FUEL TANK.
Our information is based on thorough research and may be considered reliable, although not legally binding.
Pro Engine Oil Additive
Description
Ensures immediate friction and wear reduction, contains molybdenum disulfide adds an extremely protective and pressure-resistant boundary layer with low friction. It lubricates during cold starts to prevent damage from lack of oil. Contributes to lower fuel consumption, longer engine life, and less noise.
Areas of application
Added to the lubricating oils of engines, compressors, pumps and especially motor vehicle engines (gasoline and diesel). Mixable with all commercially available motor oils.
- 125 ml Can
- Part No. 22208
- Can be added to motor oil at any time.
APPLICATION - 125 Ml ARE ENOUGH FOR UP TO 6 LITERS OF OIL
STEPS: Shake the product and apply directly to the oil reservoir.
Comment: The maximum dosage for motorcycles with a wet clutch is 2%!
Our information is based on thorough research and may be considered reliable, although not legally binding.
